The EK1 Motorcycle Ramp and Extension Kit is designed for sport bikes where ground clearance is very low due to lower and front fairings. It breaks the angle in half at the top of the ramp (apex) so that the motorcycle does not bottom out when loading and unloading. The ramp will handle a motorcycle with up to about 58" wheelbase weighing up to 500 lbs with rear tire width up to 8". Overall length is approximately 66".

The EK1 includes a 21-1/4" lower ramp, fold-up support brackets, and a 44-1/2" long upper ramp. The upper ramp is same as the R1 ramp, but the edges at top and bottom are lowered for extra clearance. The ramps are 3/16" steel with black enamel. The brackets are 14 guage zinc plated steel.