Motorcycle Rail/Ramp Kit, Assembled Rail and Wheel Block Size: 5" W x 2-3/8 H x 73-1/2 L, Can be mounted on almost any flat trailer bed with minor amount of drilling. Includes assembly and mounting hardware. Product Detail

The TS32RMP, motorcycle ramp, fits into our 5" wide motorcycle rail kits or can be used on any flat surface where there is a hole for the mounting stud. It is made of 3/16" steel with black powder coat enamel. This ramp is ideal for dirt bikes and small motorcycles.

Motorcycle Rail/Ramp Kit, Wheel Block and Front Rail Section: 6-1/2" W, Rear Rail Section and Ramp: 8' W, Assembled Rail with Wheel Block: 86-1/2" L, Rail Height: 2-3/8, Adjustable Wheel Block Placement, Includes Storage Bracket For Ramp. Product Detail

The R2 Motorcycle Rail Kit includes an adjustable position wheel block, 6-1/2" wide by 41-1/2" front rail section, 8" wide by 39-1/2" rear rail section, and mounting hardware. The rail sections and wheel block are made of 3/32" steel with black powder coat enamel. This is same as TS76M, but does NOT include a ramp or ramp storage brackets. Shipping Weight 26.4 lbs

The R1 motorcycle ramp fits into our 8" wide motorcycle rail kits or can be used with any flat surface where there is a hole for the mounting stud. It is made of 3/16" steel with black powder coat enamel. This ramp is ideal for dirt bikes and motorcycles that are not too long and have good ground clearance. It will support motorcycles weighing up to about 600 lbs. For sport bikes see the EK1

To add the optional storage brackets and hardware ($15), select the Storage Brackets and Hardware option when adding this product to the cart.

The EK1 Motorcycle Ramp and Extension Kit is designed for sport bikes where ground clearance is very low due to lower and front fairings. It breaks the angle in half at the top of the ramp (apex) so that the motorcycle does not bottom out when loading and unloading. The ramp will handle a motorcycle with up to about 58" wheelbase weighing up to 500 lbs with rear tire width up to 8". Overall length is approximately 66".

The EK1 includes a 21-1/4" lower ramp, fold-up support brackets, and a 44-1/2" long upper ramp. The upper ramp is same as the R1 ramp, but the edges at top and bottom are lowered for extra clearance. The ramps are 3/16" steel with black enamel. The brackets are 14 guage zinc plated steel.

36" Wide x 94" Long - 3 Hinged PanelsRamp Weight: 65 lbs., Capacity 1500 lbs. Large motorcycle can be ridden up ramp. 9 Rubber-Tipped Fingers grab tailgate securely. 4 Detaching Hinges facilitate easy storing and transportation. Folds up to 4.124" deep by 18" wide. .438" Serrated Cross Bars provide superior traction and are alternately welded top and bottom to increase lateral strength. 43" Arch prevents dragging . Large Serrated Crossbars provide superior traction. Constructed of .125 Gauge Aluminum. Two Adjustable 3' Safety Cables with S hooks secure ramp in place. Guaranteed 5 Years Flat-rate shipping $45

.
Application Chart with Aluminum Ramp Specifications And Product Details

HT Series - 11 x 78" with Rods, 1000 lbs capacity, 38 lbs shipping wt.

HT Series - 11 x 78" with Mesh, 1000 lbs capacity, 41 lbs shipping wt.

HT Series - 18 x 94" with Rods, 1000 lbs capacity, 31 lbs shipping wt.

HT Series - 18 x 94" with Mesh, 1000 lbs capacity, 39 lbs shipping wt.

HT Series - 36 x 94" with Rods, 1500 lbs capacity, 78 lbs shipping wt.

HT Series - 11 x 89" with Rods, 1000 lbs capacity, 36 lbs shipping wt.

HT Series - 11 x 89" with Mesh, 1000 lbs capacity, 47 lbs shipping wt.

HT Series - 11 x 89" with Rods, 1500 lbs capacity, 38 lbs shipping wt.

HT Series - 11 x 89" with Mesh, 1500 lbs capacity, 52 lbs shipping wt.

12" Wide x 78" Long Motorcycle Ramp, Weight: 13 lbs. 500 lbs. Capacity 4 Rubber-Tipped Fingers grab tailgate securely. Evenly Spaced Bars facilitate various wheel sizes. 2.5" Arch prevents equipment drag. Large Serrated Crossbars provide superior traction. Constructed of 0.073 Gauge Aluminum. 2 Adjustable 3' Safety Cables with S hooks secure ramp in place. Guaranteed 5 Years Flat-rate shipping $15

18" Wide x 94" Long Motorcycle Ramp Weight 30 lbs., 1000 lb. Load Capacity 4 Rubber-Tipped Fingers grab tailgate securely. Evenly Spaced Bars facilitate various wheel sizes. 4.5" Arch prevents equipment drag. Large Serrated Crossbars provide superior traction. Constructed of .125 Gauge Aluminum. Two Adjustable 3' Steel Safety Cables with S hook. Guaranteed 5 Years Flat-rate shipping $20

12" Wide x 89" Long Motorcycle Ramp Weight: 23 lbs., 750 lbs. Capacity 4 Rubber-Tipped Fingers grab tailgate securely. Evenly Spaced Bars facilitate various wheel sizes. 2.5" Arch prevents equipment drag. Large Serrated Crossbars provide superior traction Constructed of .125 Gauge Aluminum Two Adjustable 3' Safety Cables with S hooks secure ramp in place. Guaranteed 5 Years Flat-rate Shipping $2

12" Wide x 102" Long Motorcycle Ramp, Weight: 25 lbs. 750 lbs. Capacity 4 Rubber-Tipped Fingers grab tailgate securely. Evenly Spaced Bars facilitate various wheel sizes. 2.5" Arch prevents equipment drag. Large Serrated Crossbars provide superior traction. Constructed of .125 Gauge Aluminum. Adjustable 3' Safety Cable with S hook secure ramp in place. Guaranteed 5 Years Flat-rate shipping $20